Cutting & Sealing Machhinery - Special Hand Bag Making Machine - HM-810SFP-SV/1000SFP-V  
HM-810SFP-SV/1000SFP-SV/HM-1250SFP-SV
 
Fully Automatic Plastic Bag Making Machine

With soft loop handle bag

With patch handle bag

With poly draw handle bag

With die cut handle bag

MANUFACTURE OF SOFT LOOP CARRIER BAGS AND POLY DRAW CARRIER BAGS

At the rear, one unwind station for the polyethylene handle film. The film width is identical to the loop length. The film is cut into narrow strips, and fed into the top fold. The flexible handle film feeding system is driven by pneumatic control.

The film for th Poly Draw Handle should be pre-slit to width and automatically fed into the top folds of the carrier bag by special forming tool.

PHOTOCELL CONTROL AND PRE-SEALING STATION

This series of machine uses Erwin Sick Photocells for pricise control of print image to the side weld. Additional stability of the side weld in the area of the bottom gusset and top gusset by the pre-sealing station for the four layers of film.


UNWIND SYSTEMS AND TOP FOLD

The unwind unit is equipped with a pneumatic hydraulic web guide control system. The maximum reel diameter is 90m and maximum film width 85cm, maximum reel weight 150 kgs.

For converting sheet film a folding unit can be purchased to run in-line with the machine. A low friction top folding device for a single side or two sides fold through a system of folding rollers with guide plates is fitted. The whole unit is well designed for ease of operation and low maintenance.


HANDLE PUNCH

The pneumatically controlled handle punch is equipped with knife type cutter designed for long service life and easy exchange operation.


THE MANUFACTURE OF THE PATCH CARRIER BAGS

The patch handle film feeding system is driven pneumatically. The reel of patch film is fed, cut and welded automatically to the top central position of the PE Carrier Bag.S

SPECIFICATIONS:
Model
HM-810SFP-SV
HM-1000SFP-SV
HM-1250SFP-SV
Bag Size(mm)
Width
(Each Line)
250-650mm
250-650mm
250-650mm
Length
250-650mm
250-900mm
250-1050mm
Top Folding
Max.75mm
Max.75mm
Max.75mm
Bottom Gusseting
up to 65mm
up to 65mm
up to 65mm
Max. Production Speed cycles/min
Soft handle 55 Patch 65
Poly Draw 65 Die Cut 75
Tickness of Film(mm)
0.045-0.09
0.045-0.09
0.045-0.09
Heaters
1.8KWx1
0.4KWx6
1.8KWx1/0.8KWx2/
0.4KWx6
2.2KWx1/0.8KWx2/
0.4KWx6
Power Required
8.5KW
10KW
12KW
Machine Dimensions
L(M)
7.6
7.6
7.6
W(M)
3.0
3.2
3.45
H(M)
1.85
1.85
1.85
Machine Weight
3,500kg
4,200kg
5000kg
Air Compressor (not included)
5HP
5HP
5HP
HEMINGSTONE MACHINERY CO., LTD.
No.41, Wu-Kong 5 Rd., Wu-Ku Ind., Park. Wu-Ku Dist., New Taipei City, 248 Taiwan
Tel:886-2-22991616 , 22995700
Fax:886-2-22992070 , 22992080
E-Mail: hm.stone@msa.hinet.net hm_mail@hemingstone.com
http://www.hemingstone.com